型号/Model：450DT
» 工件宽度 ≥120mm
» 工件长度 ≥200mm
» 工件厚度 12-25mm
» 边带厚度 Pvc 0.8-1.5mm，木皮 0.3-0.6mm
» 斜边角度 45°(不可调)
» 进板速度 13m/min
» 装机功率 12kw
» 外形尺寸 4980*900*1600mm
» 电 压 380/220v 50Hz
» 气 压 0.65Mpa
» 重 量 1870kg
45°锯切单元
45° Sawing unit
配备多张锯片对预留直边以外的斜边进行粉碎性锯切，以便于吸尘，本单元配有独立的吸尘间尽可能减少粉尘外漏，装有可视窗口，锯削过程清晰可见（直面预留3-10mm可调）。
Several saw blades are equipped in this unit to saw the bevel. Within the unit, there is an independent dust-collector, which can prevent the dust from flying outside. With visible checking window, the sawing process is there to be seen. (The reserved straight edge is adjustable within the range of 3mm-10mm.)
边带保温装置（选配）
Warm-keeping device for edge band (optional)
本装置适用于较寒冷地区，当出现边带粘合不牢固或边带过硬时可以开启此功能，可以提高粘贴强度和边带软化的作用。
The device is applicable in cold areas. When the edge band is not adhesive enough or its surface is too hard, the warm-keeping device can be turned on to produce better adhesive effect and soften the edge band.
涂胶压贴单元
45° bevel gluing unit
采用直面斜面一次性板材同时涂胶原理（专利产品），快速与边带贴合来减少多次涂胶温度减低的问题，装配有两边气动压轮分别对斜边和直面进行贴合压紧。
Both the straight and the bevel face can be glued at the same time within this unit, thus preventing temperature from cooling down as a result of several gluing operations. The unit is also equipped with pressure rollers to make sure the straight and the bevel face are well adhered.
边带开槽单元
Edge-notching unit
边带开槽装置配备气动式压带，更稳定，调节更便捷，对边带需要折合位置进行开槽成型处理，以达到封边表面轮角完美清晰（开槽高度根据产品要求可调，开槽深度也可根据边带厚度调整）。
This unit is equipped with pneumatic pressure band which can provide more stable operation and is more convenient to be adjusted. It gets the folding parts notched, ensuring well connection.
热风辅助单元
Heating device
暗藏式风扣设计，合理的出风角度，对边带软化的同时，也对布胶面进行二次加温，使封边效果更显完美。
With a concealed inlet and a reasonably designed outlet,the device not only can soften the edge band, but also can heat the edge band again, therefore making sure the edge banding is more perfect.